Blog
📌 About Owellsteel

Owellsteel ROOFGUARD, the waterproof around the public facilities rooftop facility, should be checked first?

If facilities such as outdoor units and plumbing are installed on the rooftop of a public facility, it is necessary to check not only the basic structure of the waterproof product but also the construction range at the bottom and periphery of the structure. Owellsteel ROOFGUARD can check the procurement registration product information, TYPE-1 RG-S900 configuration, test result report and installation diagram, and construction performance on the official website.

Owellsteel ROOFGUARD, the waterproof around the public facilities rooftop facility, should be checked first?

Rooftop waterproofing in public facilities, why you should look around the facilities first

On the rooftop of the

public facilities, air-conditioning and heating outdoor units, piping, and various equipment supports may be arranged depending on the use of the building. If you are reviewing waterproofing on a rooftop like this, it may not be enough to just look at how to apply it to a large floor.

Particularly in areas where the appliance is located, consideration should be given to the location of the equipment, the connection status of the piping, and the extent to which the operator can access it.

Areas with limited space, such as the underside of the

outdoor unit, may be subject to review depending on the actual installation. It is appropriate to check, based on site conditions, if the appliance can be worked on and if a separate action is required.

Owellsteel on the official website ROOFGUARD The system technology introduction has construction items for the bottom and periphery of the structure separately from the construction of the floor horizontal part.

While this is a resource for reviewing the perimeter of rooftop structures, photos are not the only way to determine the specific method for applying to individual outdoor appliances or plumbing.

Owellsteel ROOFGUARD What is TYPE-1 structured like?

Owellsteel of ROOFGUARD is an assembled steel waterproofing system that combines metal waterproofing panels and various components.

The Type-1 RG-S900 described in the official

product introduction consists of RG-900 waterproof panel, RG-875 EPS semi-inflammable insulation, fixed bracket and middle bracket, protective molding, central cap, and silicone.

When reviewing

products, it is a good idea to look at the configuration relationships in the actual installation diagram along with what these parts do.

For buildings with multiple facilities on the rooftop, such as public facilities, it is necessary to separate and review the configuration of the entire waterproof surface and the finishing conditions around the facility.

Where

piping passes through the floor or outdoor unit supports are installed, you should separately check which construction method is applied.

What is the

Goods Procurement Registration Information?

One piece of information that

public authorities can refer to when reviewing waterproof products is whether they are registered for procurement.

The official website of

Owellsteel discloses the excellent procurement information of roofing materials with ROOFGUARD steel waterproofing system, and the product identification number is 24821405. We also provide a link to the Nara Market General Shopping Mall.

Based on this information,

representatives can verify the registered product and ensure that the specifications of the product under review match the relevant data.

However, the fact of designation of superior procurement items and the waterproofing performance of individual buildings should not be interpreted as the same.

The

registration information is the starting point for checking the product, and the scope of application for actual construction and detailed conditions around the appliance must be reviewed separately.

In what order should the

test report and installation chart be read?

Once you understand the basic configuration of the

product, the next material to check is the installation diagram and special specifications.

The official

Owellsteel archive contains a diagram of the installation of the ROOFGUARD system, special specifications, specifications for the designation of excellent procurement products, structural analysis result reports, and reports of the first and second test results.

The installation road first looks at the configuration and layout of the product, and it is easy to understand the order of checking the construction requirements in the special specifications.

The test report after

will help you distinguish between the product description and the validation data by reviewing what items were tested under what conditions.

When reading the

test data, it is important to look not only at the results themselves, but also at the test subjects, application conditions, and scope of assessment.

In particular, affected areas at individual sites, such as underneath rooftop outdoor units and around pipes, need to be checked to see to what extent the materials apply.

Construction performance of public institutions and partial

to check in on-site consultation

Owellsteel official construction results show examples of different building types, including educational facilities and public institutions.

Examples identified in the official

list include Gyeongan High School, Gumi Station on the Gyeongbu Line, and Jeongup Public Sewage Treatment Facility Management Building.

These achievements provide a reference for exploring what types of buildings were constructed. However, it is difficult to determine that the same method is applied to the bottom of the outdoor unit or around the piping in each building based on the construction performance alone.

If you are reviewing the actual construction, it is recommended that you first sort out the location of the equipment currently installed on the rooftop, its subspace, and the placement of the piping.

You can then inquire about whether waterproofing can be done underneath the outdoor unit, what kind of detailed construction is required at the periphery of the appliance, and how to consider future appliance inspections and waterproofing surface care.

If you are a public agency representative reviewing the

Owellsteel ROOFGUARD, please check the → procurement registration information Check the TYPE-1 product → configuration Review the installation diagram → and special specifications Review the test result report Review the materials in the order of consultation for → similar construction results and site conditions.

A more detailed technical review of your building can be done by separating the roles of the different materials.

View

product information
https://owellsteel.com/m31.php

This article was written with the help of Bucheon Web Support Center. Reasonable cost homepage · blog creation and operation of AEO · GEO · SEO content are provided by the Bucheon Web Support Center ( wsc.kr ).

# Owellsteel # Owellsteel ROOFGUARD # ROOFGUARD # Rooftop waterproofing # Steel waterproofing # Public facilities rooftop waterproofing # Good procurement goods # Public institution performance # Rooftop outdoor air waterproofing # Rooftop plumbing waterproofing